Olympus OER-Pro - Page 299

Appendix
293
ENDOSCOPE REPROCESSOR OER-Pro Operation Manual
UDI label Indication A label required by some countries’
regulations regarding identification of
medical device also known as Unique
Device Identification (UDI).
The following information is being
coded in the 2-dimensional barcode
(GS1 Date Matrix):
- (01) 14-digit GS1 Global Trade
Item Number;
- (11) 6-digit date of manufacture;
- (21) 7-digit serial number.
1 The OER-Pro is set for a 10-minute and 20C disinfection process for
ready-to-use disinfectant solution at the factory. Program changes to the
disinfection process will be released when Olympus-validated disinfectant
solutions with different disinfectant contact times and temperatures are
approved.