Omron E5CSV - Names of Parts; Alarm Indicators; Deviation Indicators; E5 Cs-U

Section 1 Overview
1-2
Overview
1.1 Names of Parts
■ Front Panel
● E5CSV ● E5CS-U
■ Meanings of Indicators and Display
● Temperature
display
Displays the present temperature or the parameters for the set point,
etc.
Displays 0 and lights for approximately one second during startup.
● Output indicator
OUT (control output): Lights when the control output function is ON.
● Alarm indicators
(1) ALM1(Alarm 1): Lights when the alarm 1 function is ON.
(2) ALM2 (Alarm 2): Lights when the alarm 2 function is ON.
● Mode indicators
(1) SP (SP mode): Lights when SP mode is being used. Lights
when the SP is being displayed in the operation level.
(2) ALM (ALM mode): Lights when ALM mode is being used. Lights
when the alarm value 1 is being displayed in the operation level.
Flashes when alarm value 2 is being displayed.
● Deviation
indicators
▲ : Lights when the deviation between the PV and SP is greater than
1% FS (multi-input (thermocouple/platinum resistance
thermometer) models: 0.25% FS).
■ : Lights when the deviation between the PV and SP is within ±1%
FS (multi-input (thermocouple/platinum resistance thermometer)
models: ±0.25% FS).
▼ : Lights when the deviation between the PV and SP is smaller than
−1% FS (multi-input (thermocouple/platinum resistance
thermometer) models: −0.25% FS). Either of the deviation
indicators flashes during ST (self-tuning)/AT (auto-tuning)
operation.
* The temperature range within which the ■ deviation indicator
lights can be changed in the initial setting level (1).
Tool insertion hole
Tool
insertion hole
Down Key
キ
Alarm indicators
Up Key
Output indicato
r
Temperature display
Deviation
indicators
Mode
indicators
Mode Key
Lock Release Key
Front door
opening/closing
groove
Front doo
r
Deviation
indicators
Te m
p
erature dis
p
la
y
Output indicato
r
Alarm indicators
Up Key
Down Key
Mode
indicators
Mode Key