Omron E5CSV User Manual

1.2 I/O Configuration and Main Functions
1-5
Overview
● Control Outputs
• A control output can be relay or voltage output, depending on the
model.
● Alarms
• Alarms are supported by E5CSV-@1@@-@, E5CSV-@2@@-@,
E5CS-@1@@U-@, and E5CS-@2@@U-@. Set the alarm classification
and alarm value or the alarm's upper and lower limits. If necessary, a
more comprehensive alarm function can be achieved by setting the
standby sequence, close in alarm/open in alarm, and alarm latch
parameters.
● Control
Adjustment
• Optimum PID constants can be set easily by performing AT
(auto-tuning) or ST (self-tuning).

Omron E5CSV Specifications

General

Setting Method	Digital setting using front panel keys
Dimensions	48 x 48 x 78 mm (W x H x D)
Number of Control Outputs	1
Control Method	ON/OFF control or PID control
Input Types	Thermocouple
Supply Voltage	100 to 240 VAC
Output Type	Relay or Voltage (for driving SSR)
Display	7-segment digital display
Mounting Method	Panel mounting
Setting Resolution	0.1 °C or 1 °C
Power Supply Voltage	100 to 240 VAC
Ambient Operating Humidity	25% to 85% RH
Ambient Operating Temperature	-10 to 55°C (with no icing or condensation)