Omron E5CSV User Manual

1.3 Setting Level Configuration and Key Operations
1-7
Overview
■ Selecting
Parameters
• Within each level, the parameter is changed each time the M Key is
pressed.
■ Fixing Settings
• If the M Key is pressed at the final parameter, the display returns to
the top parameter for the current level.
• To change parameter settings, specify the setting using the U or D
Key, and either leave the setting for at least 2 s or press the M Key.
This fixes the setting.
• When another level is selected after a setting has been changed, the
contents of the parameter prior to the change are fixed.
• Be sure to first fix the settings (by pressing the M Key) before
turning OFF the power. The settings are sometimes not changed by
merely pressing the U or D Keys.
Parameter
1
Pa
r
ameter
2
Parameter
3
Parameter
4
M
M
The parameter changes immediately after pressing the M key.
M
M

Omron E5CSV Specifications

General

Setting Method	Digital setting using front panel keys
Dimensions	48 x 48 x 78 mm (W x H x D)
Number of Control Outputs	1
Control Method	ON/OFF control or PID control
Input Types	Thermocouple
Supply Voltage	100 to 240 VAC
Output Type	Relay or Voltage (for driving SSR)
Display	7-segment digital display
Mounting Method	Panel mounting
Setting Resolution	0.1 °C or 1 °C
Power Supply Voltage	100 to 240 VAC
Ambient Operating Humidity	25% to 85% RH
Ambient Operating Temperature	-10 to 55°C (with no icing or condensation)