Omron E5CSV - Setting Levels Diagram

Setting Levels Diagram
A-14
Appendices
Setting Levels Diagram
This diagram shows all of the setting levels. Some parameters are not displayed depending on the
protect level setting and the conditions of use.
Control is stopped for each of the initial setting levels.
Operation
level
Power ON
*
：
INIT switch: ON
：
Protect switch: OFF
U Key
-
0
-
1 2 ALM ALM SP
OUT
Level change
Control in progress
Control stopped
Initial setting
levels (1) to
(
5
)
Initial setting
level
Press the
M
Key for at
least 3 s.
After selecting the mode
using the U/D Keys,
press the M Key.
＊ If there is no key input for 5 s or longer, a software reset will be performed to change to the operation
level.
Control in
progress
Control
stopped
Operation level
○ −
Initial setting level
− ○
○: Setting enabled