Omron E5CSV - Page 67

Section 5 Parameters
5-4
Parameters
Process value
• Displays the process value (except when no PV display is selected)
* The decimal position is set automatically by the selected Sensor.
Monitor range Unit
Process
value
Input indication range
(See pages A-12 and A-13.)
EU
SP mode
Set point
• Displays the set point.
* The decimal position is set automatically by the selected Sensor.
Setting range Unit Default
Set point SP lower limit to SP upper limit EU 0
ALM mode
Alarm value 1
This parameter is set to the input values “X” or “Y” in the alarm type list.
• This parameter sets the alarm value for alarm output 1.
* The decimal position is set automatically by the selected Sensor.
Alarm
type
Setting range Unit Default
1 to 7 0 to temperature range full scale EU 0
8 Input setting range lower-limit value to
temperature range upper-limit value
EU 0
Function
Function
Setting
Function
Setting