Omron E5CSV - Page 81

Section 5 Parameters
5-18
Parameters
IS mode (1)
Control output assignment
ot
• This parameter sets the function to be assigned to the control output.
Displayed
number
Set value Setting range Default
0 No assignment
1 Control function
2 Alarm 1 function
3 Alarm 2 function
0 to 3 1: Control function
IS mode (2)
Alarm 1 assignment
a1
• This parameter sets the function to be assigned to alarm output 1.
Displayed
number
Set value Setting range Default
0 No assignment
1 Control function
2 Alarm 1 function
3 Alarm 2 function
0 to 3 2: Alarm 1 function
* Not displayed for models without alarm outputs.
Function
Setting
Function
Setting