Functions and Operations
Section 5 Functions and Operations
5-28
• S-TMR processing takes priority even if the TIMING input turns
ON while the S-TMR input is ON.
Resetting measurements
→ P. 5 - 2 6
F Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
G Use the U [UP] and S [SHIFT] Keys
to change the set value.
H Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
I Press the L [LEVEL] Key for at least
1 s to return to the initial setting level.
1 s min.
J Press the L [LEVEL] Key for at least
1 s to return to RUN level.
1 s min.
S
s-tmr
00. 0
L f
SU
s-tmr
10. 0
L f
M
s. err
s. err
L f
L
L 0
L
123. 4
123. 4
Remarks
To Next Page
Loading...
