Omron K3HB-H - Section 3 Basic Application Methods; Monitoring Tank Levels

Basic Application Methods
Basic Application Methods
Section 3 Basic Application Methods
3-2
3.1 Monitoring Tank Levels
Advantages of Using the K3HB-X
• The tank level can be monitored
• The distance to the surface of the liquid can be detected using an
E4PA-LS400-M1 Ultrasonic Displacement Sensor (Sonic
Displacement Sensor).
• The liquid volume can be displayed on the K3HB-X to indicate
volume in liters (@@ l). The tank level can also be shown using the
20-section display on the position meter (provides a full-scale level
display).
• The number of measurements to be averaged (averaging times)
can be set to 4 to ensure stable readings of levels in relation to full
scale.
• Comparative outputs can be generated for tank volume on four
levels: dry tank alarm, lower limit alarm, upper limit alarm, and full
tank alarm.
• The display can be forcibly shifted to 0 for readings less than zero
or readings outside the detection range of the Ultrasonic
Displacement Sensor.