Omron K3HB-H - Copying Bank Comparative Set Values

Functions and Operations
Section 5 Functions and Operations
5-98
5.39 Copying Bank Comparative Set Values
The bank copy function is used to specify a bank between 0 and 7 and
copy the group of comparative set values in that bank to all banks.
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
3 s min.
• “ L 0 ” is displayed on the level/bank
display to indicate the initial setting level.
B Press the L [LEVEL] Key several times to
move to the comparative set value level.
•“L 4" is displayed on the level/bank
display to indicate the comparative
set value level.
C Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
D Use the U [UP] Key to select the bank
to be copied from.
E Press the M [MODE] Key to switch to
the next parameter.
• Change the comparative set values
HH, H, L, and LL as required.
F Press the M [MODE] Key several times
to change the PV display to “copy.”
G Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
H Use the U [UP] Key to change the SV
display to “on.”
X V S H
copy
L 4
(COPY)
L
Displays “L 0.”
L 0
L
sv. bnk
Displays “L 4."
0
L 4
S
sv. bnk
0
L 4
U
sv. bnk
1
L 4
M
sv1. hh
10000
L 4
M
copy
off
L 4
S
copy
off
L 4
U
copy
on
L 4