Omron K3HB-H - Page 110

Functions and Operations
5.12 Eliminating Drift Near “0”
5-37
G Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
H Use the U [UP] and S [SHIFT] Key to
change the zero-limit value.
I Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
J Press the L [LEVEL] Key for at least
1 s to return to RUN level.
1 s min.
M
lim-p
00
L 1
SU
lim-p
0010
L 1
M
step
off
L 1
L
1234. 5
1234. 5