Functions and Operations
Section 5 Functions and Operations
5-66
● Using ZERO Inputs
Executing forced-zero: Forced-zero is executed on the rising edge of the ZERO input ON signal (when
ZERO input is ON for 1 s max.).
Clearing forced-zero: Forced-zero is cleared when ZERO input is ON for 1 s min.
Setting the present measurement value to “0” again using the forced-
zero reference
→ P.5-67
(Tare zero)
Prohibiting key-operated forced-zero
→ P.5-102
(Key protect)
Remarks
To Next Page
Loading...
