Functions and Operations
5.26 Setting the Present Measurement Value to “0” Again when Using a Forced Zero
5-69
Setting the present measurement value to “0” (forced-zero) → P.5-65
G Use the U [UP] Key to change the set
value to “on.”
• Change the set value to “off” to turn
OFF tare zero.
H Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
I Press the L [LEVEL] Key for at least
1 s to return to the initial setting level.
1 s min.
J Press the L [LEVEL] Key for at least
1 s to return to RUN level.
1 s min.
U
t-zr
on
L f
M
z-trm
off
L f
L
L 0
L
123. 4
123. 4
Remarks
To Next Page
Loading...
