Appendices
Appendices
A-10
Base Units with Optional Boards
1. Models by Type
2. Input Range
3. Analog, Communications, and Other Output Specifications (K33)
4. Relay/Transistor Output Specifications (K34)
5. Control Input Specifications (K35)
6. Power Supply Specifications
Note: 1) CPA and CPB can be combined with relay outputs only.
2) Only one of the following can be used by each Digital Indicator: RS-232C/RS-485 communications, BCD
communications, or DeviceNet communications.
K3HB-@@-@@@ @
Code Input specifications
X Voltage and Current Process Indicator
V Weighing Indicator
S Linear Sensor Indicator
H Temperature Indicator
Code Auxiliary output and external power supply specifications
VD DC voltage input
AD DC current input
VA AC voltage input
AA AC current input
LC Load cell input (DC low-voltage input)
SD Process input
TA Temperature input
Code Auxiliary output and external power supply specifications
None None
CPA Relay output (PASS: SPDT) + Sensor power supply (12 VDC, ±10%, 80 mA)
CPB Relay output (PASS: SPDT) + Sensor power supply (10 VDC, ±5%, 100 mA)
L1A Linear current output (DC0(4) - 20 mA) + Sensor power supply (12 VDC, ±10%, 80 mA)
L1B Linear current output (DC0(4) - 20 mA) + Sensor power supply (10 VDC, ±5%, 100 mA)
L2A Linear voltage output (DC0(1) - 5 V, 0 to 10 V) + Sensor power supply (12 VDC, ±10%, 80 mA)
L2B Linear voltage output (DC0(1) - 5 V, 0 to 10 V) + Sensor power supply (10 VDC, ±5%, 100 mA)
A Sensor power supply, 12 VDC, ±10%, 80 mA
B Sensor power supply, 10 VDC, ±5%, 100 mA
FLK1A Communications (RS-232C) + Sensor power supply (12 VDC, ±10%, 80 mA)
FLK1B Communications (RS-232C) + Sensor power supply (10 VDC, ±5%, 100 mA)
FLK3A Communications (RS-485) + Sensor power supply (12 VDC, ±10%, 80 mA)
FLK3B Communications (RS-485) + Sensor power supply (10 VDC, ±5%, 100 mA)
Code Pulse output specifications
None None
C1 Relay contact (H/L:
SPDT
each)
C2 Relay contact (HH/H/LL/L:
SPST-NO
each)
T1 Transistor (NPN open collector: HH/H/PASS/L/LL)
T2 Transistor (PNP open collector: HH/H/PASS/L/LL)
BCD BCD output + transistor output (NPN open collector: HH/H/PASS/L/LL)
DRT DeviceNet
Code Control input specifications
None None
1 Control input 5 points (M3 terminal blocks) NPN open collector
2 Control input 8 points (10-pin MIL connector) NPN open collector
3 Control input 5 points (M3 terminal blocks) PNP open collector
4 Control input 8 points (10-pin MIL connector) PNP open collector
Code Power supply voltage
100 to 240 VAC 100 to 240 VAC, 50/60 Hz
24 VAC/VDC 24 VAC/VDC, 50/60 Hz
To Next Page
Loading...
