Omron K3HB-H - Page 26

Preparations
2.1 Mounting
2-3
■ Mounting Method
(1) Insert the K3HB into the mounting cutout in the panel.
(2) Insert watertight packing around the Unit to make the mounting watertight.
(3) Insert the adapter into the grooves on the left and right sides of the rear
case and push until it reaches the panel and is fixed in place.
■ LCD Field of Vision
The K3HB is designed to have the best visibility at the angles shown in
the following diagram.
Watertight packing
Adapter
30˚
10˚