Omron K3HB-H - Page 54

Basic Application Methods
Basic Application Methods
3.5 Product Height Measurement and OK/NG Judgement
3-15
■ K3HB-S Setting Details
RUN Level
✽ Check on the status displays.
Initial Setting Level (L 0)
Input Adjustment Level
(L 1)
Shape of workpiece
Displacement
sensor output
Sync sensor
K3HB-S
Display
K3HB-S
Comparative outputs
Far
Near
ON
OFF
2 mm
R
Insufficient
press-fitting
Press-fitting
omitted
3 mm
0. 00 2. 00 -3. 00
PASS H LL
Parameter Characters Set value Remarks
Comparative
set value HH
✽
3.
00
Example of monitoring in
two stages, at the ±2 mm
and ±3 mm from the
reference.
Comparative
set value H
✽
2.
00
Comparative
set value L
✽
-2.
00
Comparative
set value LL
✽
-3.
00
Parameter Characters Set value Remarks
Calculation cal 0 A
Input type A in-ta 4-20
Scaling input
value A1
inp.
a14. 000
Scaling display
value A1
dsp. a1-4. 00
Scaling input
value A2
inp.
a2 20. 000
Scaling display
value A2
dsp. a2 4. 00
Decimal point
position
dp ,,,.
,,
-4
4
0
4
20
Displacement
(mm)
Output (mA)
Z4W-V25R
Parameter Characters Set value Remarks
Timing hold tmg-h s-h Sampling hold