Omron K3HB-H - Page 62

Basic Application Methods
Basic Application Methods
3.8 Step Inspection
3-23
■ K3HB-S Setting Details
RUN Level
✽ Check on the status displays.
Displacement sensor
(A) output
(20 mA) 29 mm
(12 mA) 25 mm
(4 mA) 21 mm
(20 mA) 29 mm
(12 mA) 25 mm
(4 mA) 21 mm
ON
H
OFF
ON
OFF
ON
OFF
ON
OFF
Displacement
sensor A
3.00
26.0 mm
25.6 mm
26.4 mm
(Carrier movement)
23.0 mm
3. 00
2.
80
3. 20
22.8 mm
23.2 mm
(Carrier movement)
2.80
3.20
Displacement
sensor B
Displacement sensor
(B) output
Sync sensor output
K3HB-S display
K3HB-S
comparative outputs
* The previous judgement result is held until
the Sync Sensor turns ON. (All outputs turn
OFF when RESET input is received.)
PASS
L
Parameter Characters Set value Remarks
Comparative
set value H
✽ 2.
50
Monitoring a difference of
±0.5 mm for a reference
step of 2 mm
Comparative
set value L
✽ 1.
50