Omron K3HB - Limiting Key Operations

Functions and Operations
Section 5 Functions and Operations
5-80
5.35 Limiting Key Operations
The "key protect" function limits level and parameter changes using
key operations. There are 4 kinds of key protection. The parameters,
settings, and details of each kind of protection are outlined below.
: Enabled, : Prohibited
● RUN/adjustment protect
(Limits key operations in RUN level and movement to
adjustment level.)
● Setting level protect (Limits moving to other levels.)
● Setting change protect (Disables changing settings with key
operations.)
* All protect level parameters and movement to advanced-function
setting level and calibration level can be changed.
Protect level
Parameter
Set
value
Restriction details
RUN level
Move to the
adjustment
level
Present
value
display
Comparative
set value
change
RUN/adjustment
protect
run.pt
0
1
2
Parameter Set value
Restriction details
Move to
initialization,
input adjustment,
display
adjustment,
comparative set
values, and
output test levels
Move to the
advanced-
function
setting level
Setting level
protect
set.pt
0
1
2
Parameter Set value Restriction details
Setting change protect
wt.pt
off Setting change using key
operations: Enabled
on Setting change using key
operations: Prohibited
run. pt
L p
(RUN.PT)
zr. pt
L p
(ZR.PT)
wt. pt
L p
(WT.PT)
set. pt
L p
(SET.PT)