Omron K3HB - Adjusting Timing Inputs

Functions and Operations
5.8 Adjusting Timing Inputs
5-25
5.8 Adjusting Timing Inputs
TIMING inputs can be delayed by adjusting the ON timing delay and
OFF timing delay.
The timing hold settings for on-t (ON timing delay) and off-t (OFF
timing delay) are enabled for the following conditions.
●: Setting possible --- : Setting not possible
The following example shows settings for an ON timing delay of 20 ms and an OFF timing delay of 10 ms.
● Timing hold set value set to sampling hold
Input adjustment level
Parameter Set value Meaning of set value
ON timing delay
on-t
0 to 4999 0 to 4,999 ms
OFF timing delay
off-t
0 to 4999 0 to 4,999 ms
Timing hold
set value
tmg-h
ON timing
delay
on-t
OFF timing
delay
off-t
Normal nomal --- ---
Sampling hold s-h ● ---
Peak hold p-h ●●
Bottom hold b-h ●●
Peak-to-peak
hold
p-p
●●
on-t
L 1
(ON-T)
ON timing delay
OFF timing delay
TIMING signal
TIMING input
off-t
L
1
(OFF-T)
Explanation of Functions ON timing delay, OFF timing delay
20 ms 20 ms 20 ms
TIMING
RESET
Measurement
value
Power ON
Delay processing invalid due to reset input.
Timing delay time
No measurement No measurement
Measurement
value 1
Measurement value 2