Functions and Operations
Section 5 Functions and Operations
5-20
5.5 Resetting Measurements
When the RESET input turns ON or the [MAX/MIN] Key is pressed
for at least 1 s, the maximum value, minimum value, and outputs are
cleared. Measurement is not performed during RESET input.
• The display during RESET input is "-----" and all outputs are
OFF.
• HOLD and TIMING are disabled during RESET input.
• Forced-zero is not accepted during HOLD input.
Not performing measurements for set intervals. → P.5-21
HH/H
LL/L
RESET input
Min.
value
Max.
value
No measurement
status
Comparative
set value HH/H
Comparative
set value LL/L
Output
Output
Measurement
value
Remarks
To Next Page
Loading...
