Omron K3HB - Knowledge Required for Setting Parameters

Functions and Operations
Section 5 Functions and Operations
5-2
Knowledge Required for Setting Parameters
■
About Levels
Levels are groups of parameters.
Levels for the K3HB-S are classified as follows:
Important
Depending on the level,
measurements may
continue to be executed or
stop. Check the
measurement operation.
Level Function
Measurement
operation
Protect
Makes settings to prevent inadvertent
key operations. Movement between
levels and changes to settings may be
prohibited, depending on the protect
settings.
Measurement
RUN
This is the normal operation mode
where inputs are read and comparative
judgements are made.
In RUN level, the present value can be
displayed, comparative set values
checked, and forced-zero executed or
cleared.
The K3HB-S is in RUN mode
immediately after the power is turned
ON.
Adjustment Switches banks.
Initialization
Initializes settings such as input type,
scaling, and comparative output
patterns.
Stop
Input
adjustment
Adjusts inputs.
Display
adjustment
Adjusts comparative set value display/
no display, display refresh periods,
display color, and position meters.
Comparative
set value
Makes comparative set value bank
settings.
Output test
Sets a test measurement value and
performs an output test.
Advanced-
function
settings
Used for advanced customization.