Functions and Operations
Knowledge Required for Setting Parameters
5-3
To change a parameter, move to the level where that parameter is
found. The current level is shown on the bank/level display when
moving between levels.
* B1 and B7 are displayed when banks are used.
Level/bank
display
Level
L
p Protect level
Not lit RUN level *
L
a Adjustment level
L
0 Initial setting level
L
1 Input adjustment level
L
2 Display adjustment level
L
4 Comparative set value level
L
t Output test level
L
f Advanced-function setting level
To Next Page
Loading...
