Omron K3HB - Page 44

Functions and Operations
Section 5 Functions and Operations
5-4
■
Moving Between Levels
To protect level
Press the L[LEVEL] and M[MODE] Keys in RUN level for at least 1 s
and the PV display will start to flash. Press the same keys for at least 2
s to move to protect level.
Press the L[LEVEL] and M[MODE] Keys for at least 1 s to return to
RUN level.
To adjustment level
Press the L[LEVEL] Key in RUN level once (less than 1 s). The level
will change to adjustment level when the key is released.
Use the same operation to return from adjustment level to RUN level.
To initial setting level
Press the L[LEVEL] Key in RUN or adjustment level for at least 1 s
and the PV display will start to flash. Press the L[LEVEL] Key for at
least 2 s to move to the initial setting level.
Press the L[LEVEL] Key for at least 1 s to return to the RUN level
from the initial setting level.
Input adjustment level
Display adjustment level
Comparative set value level
Output test level
First, move to initial setting level. Press the L[LEVEL] Key in initial
setting level (less than 1 s) each time to move to the next level.
Moving to the next level from the output test level returns you to the
initial setting level.
Adjustment
RUN
Power ON
Display
adjustment
LEVEL transition
Protect
Initialization
Advanced-function
setting
L
Less than
1 s
L
3 s min.
L
Less than 1 s
L
Less than 1 s
L
1 s min.
L
1 s min.
Password
L
Less
than 1 s
L
Less
than 1 s
L
Less
than 1 s
L+M
3 s min.
L+M
1 s min.
Comparative
set value
Input
adjustment
Output test
Measurement stops.
Measurement starts.
Always displayed, regardless of model and setting.
May not be displayed, depending on the model and
setting.