Omron K3HB - Page 45

Functions and Operations
Knowledge Required for Setting Parameters
5-5
Advanced-function
setting level
A special operation is required to move to the advanced-function
setting level.
Use the following procedure.
Procedure
• The advanced-function setting level will be entered if the
password is correct.
• If the password is incorrect, the next parameter is displayed and
the Unit stays on the initial setting level.
A Move to the initial setting level, press the M[MODE] Key several
times to display the "amov" (move to advanced-function setting
level) parameter.
B Press the S[SHIFT] Key to enable the password to be entered.
C Use the S[SHIFT] and U[UP] Keys to set the password.
The password is "-0169" (-0169).
D Press the M[MODE] Key and write the password.
Move to the advanced-function setting level.
The set value is always 0 after moving
from character display to monitor status.
(Does not move to the advanced-function setting LEVEL.)
To next parameter
Advanced-function setting level
Set value initialization
Password doesn't match.
Password matches.
Change status
amo
amo
0
0
f
init
Use the S [SHIFT]
and
U [UP] Keys
to set the password.