Omron K3HB - Input Compensation and Display Settings; Zero Compensation Functions: Forced-zero, Tare Zero; Display Value and Step Value Settings; Input Signal Compensation: Zero-trimming, Zero-limit

Basic Application Methods
Basic Application Methods
Section 3 Basic Application Methods
3-2
3.1 Product height measurement and OK/NG judgement
Advantages of Using the K3HB-S
• The sampling hold function can be used to use sensors
synchronously and display and hold product heights.
• The forced-zero function can be used for one-touch zero
adjustment.
• The position meter can be used to display how far the
measurement value is displaced (deviation) from the center.
• The dimensions of molded parts or for detecting caps that are not
tight on PET bottles can be checked.
● Checking Dimensions after Press-fitting
Sync Sensor
E3X-DA11-N
K3HB-S
Displacement Sensor
Z4W-V25R
Forced-zero
pushbutton switch
24 VDC
ZERO
TIMING
Input A
Operating power
supply
Operating power
supply
Connected internally.
COM
COM
+
-
Forced-zero
pushbutton
switch
Brown
Brown
Blue
Blue
Black
Black
Shield wire
Sync Sensor
E3X-DA11-N
Displacement Sensor
Z4W-V25R
+ -
K3HB-S