Omron K3HB - Page 62

Functions and Operations
Section 5 Functions and Operations
5-22
Resetting measurements → P.5-20
F Press the S[SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
G Use the U[UP] and S[SHIFT] Keys to
change the set value.
H Press the M[MODE] Key to switch to
the next parameter.
• The set value is registered.
I Press the L[LEVEL] Key for at least 1
s to return to the initial setting level.
1 s min.
J Press the L[LEVEL] Key for at least 1
s to return to RUN level.
1 s min.
S
s-tmr
00. 0
L
f
SU
s-tmr
10. 0
L
f
M
s. err
on
L
f
L
cal
0
L
0
L
123. 4
123. 4
Remarks