Omron K3HB - Page 92

Functions and Operations
Section 5 Functions and Operations
5-52
F Press the S[SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
G Use the U[UP] Key to change the set
value.
H Press the M[MODE] Key to switch to
the next parameter.
• The set value is registered.
I Press the L[LEVEL] Key for at least 1
s to return to the initial setting level.
1 s min.
J Press the L[LEVEL] Key for at least 1
s to return to RUN level.
1 s min.
S
out-n
n-o
L
f
U
out-n
n-c
L
f
M
o-stp
off
L
f
L
cal
0
L
0
L
123. 4
123. 4