Omron OS32C Series User Manual

xiii
OS32C
User’s Manual
Introduction
E
Firmware and Configuration Tool Features and Compatibility
Please refer to the table below for supported features and compatibility with OS32C versions. Refer to the
product labels to determine the OS32C version.
For information on the OS32C-DM model, please refer to the OS32C-DM Addendum available on the Omron
STI website at www.sti.com
NOTE:
• Only the version of the sensor block and the configuration tool were updated to support the new
features. No changes were made to the I/O block.
• The window replacement kit OS32C-WIN-KT can be used on any sensor block.
The part numbers have changed:
OS32C-SN: 40591-0010 (old), 40591-0020 (current)
OS32C-SN-DM: 40591-0040 (current)
OS32C Versions OS32C-DM
40591-0010 40591-0020 40591-0040
Configurable minimum object resolution -- Supported Supported
Standby mode with laser shutoff -- Supported Supported
Copy & paste zones and zone sets -- Supported Supported
Record system monitoring -- Supported Supported
Playback system monitoring -- Supported Supported
Support for inverting 7-segment display -- Supported Supported
Display configuration filename in config tool header -- Supported Supported
Additional zone shapes (180
° semi-circle, 180 °
rectangle, 180
° polygon)
-- Supported Supported
Config tool support for switching between default OS32C
configuration and the user's current working configuration
-- Supported Supported
Troubleshooting tips displayed in fault log -- Supported Supported
Configuration checksum, safety checksum Supported *1 Supported *1 Supported *1
Windows 7 support -- Supported Supported
Non-safety checksum Supported *2 Supported *2 Supported *2
Single Import & Export Zone Coordinate Data Supported *2 Supported *2 Supported *2
Maintenance access level -- Supported *3 Supported *2
Rotation of monitor screen view Supported *4 Supported *4 Supported *4
French, German, Italian & Spanish Languages Supported *4 Supported *4 Supported *4
Multiple Import & Export Zone Coordinate Data Supported *4 Supported *4 Supported *4

Omron OS32C Series Specifications

General

Brand	Omron
Model	OS32C Series
Category	Scanner
Language	English