Omron Sysmac NJ-series User Manual

15-35
15 Troubleshooting
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
15-2 Troubleshooting
15
15-2-2 Error Descriptions
* This event code occurs for unit version 1.02 or later of the CPU Unit.
Event name Controller Insufficient Memory Warning Event code 50010000 hex*
Meaning The amount of data for the EtherCAT slave configuration, network-published information, or other data exceeds the
value that is specified for the CPU Unit. You may not be able to perform online editing or other operations.
Source EtherCAT Master Function Module or
EtherNet/IP Function Module
Source details Master or CIP Detection
timing
At power ON,
download, or
online editing
Error attributes Level Minor fault Recovery Automatic recov-
ery
Log category System
Effects User program Continues. Operation Not affected.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The amount of data for the EtherCAT
slave configuration, network-pub-
lished information, or other data
exceeds the value that is specified for
the CPU Unit.
Reduce the number of PDOs that are
used by the EtherCAT slaves.
Reduce the number of data types that
are used for network variables or
reduce the length of the text strings
that are used for names.
None
Attached
information
None
Precautions/
Remarks
You may not be able to perform online editing or other operations.

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English