Omron Sysmac NJ-series - Functional Comparison of Ethernet;Ip Ports on NJ;NX-Series CPU Units and Other Series; Functional Comparison of Ethernet;Ip Ports on NJ;NX- Series CPU Units and Other Series

Appendices
A-2
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
A-1 Functional Comparison of
EtherNet/IP Ports on NJ/NX-series
CPU Units and Other Series
OK: Supported., ---: Not supported.
*1 This is equivalent to the event log in the built-in EtherNet/IP of an NJ-series Controller.
*2 You cannot use the following functions if you connect to the CPU Unit through an EtherNet/IP Unit.
• Placing the Sysmac Studio online with the CPU Unit (However, you can place the Network Configurator
online.)
• Using the Troubleshooter of an NS-series PT
Item
Built-in
Ether-
Net/IP
port on
NX701
CPU Unit
Built-in
Ether-
Net/IP
port on
NX1P2
CPU Unit
Built-in
Ether-
Net/IP
port on
NJ-series
CPU Unit
CJ-series
Ethernet
Unit
EtherNet/IP Unit (built-in
port on CJ2 CPU Unit)
Unit
version
1.0
Unit
version
2.0
Unit
version
2.1
Tag data link communica-
tions service
OK OK OK --- OK OK OK
CIP message communica-
tions service
OK OK OK --- OK OK OK
IP routing OK --- --- --- --- --- ---
Socket service OK OK OK OK --- --- ---
FTP server OK OK OK OK --- OK OK
FTP client OK OK OK --- --- --- ---
Mail send/receive --- --- --- OK --- --- ---
Web functions --- --- --- OK --- --- ---
Automatic adjustment of
PLC/Controller’s internal
clock
OK OK OK OK --- OK OK
Error history
OK
*1
OK
*1
OK
*1
OK OK OK OK
Response to PING com-
mand
OK OK OK OK OK OK OK
SNMP/SNMP trap OK OK OK --- --- OK OK
CIDR function for IP
addresses
OK OK OK --- --- OK OK
Online connection via Ether-
Net/IP using CX-One
--- --- --- OK --- OK OK
Online connection via Ether-
Net/IP using Network Con-
figurator
OK OK OK --- OK OK OK
Mounting in an NJ-series
CPU Unit
--- --- --- --- --- ---
OK
*2
Connection settings using
the Sysmac Studio
OK OK OK --- --- --- OK
Mounting in an NX-series
CPU Unit
--- --- --- --- --- --- ---