Omron Sysmac NJ-series User Manual

7-35
7 Tag Data Link Functions
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
7-2 Setting Tag Data Links
7
7-2-5 Connection Settings
3 You can change tag set names in this dialog box. To confirm a change, click the Regist Button
in the Edit Tag Set Dialog Box.
4 Perform steps 1 to 3 for all the devices to import variables and to create tag sets.
After you create the tag sets, click the Connections Tab at the top of the Edit Device Parameters Dia-
log Box, and set the following connection information.
• The target devices with which connections are opened
• The connection type (multi-cast or unicast)
• The length of the packet intervals (RPI)
• Connection name (optional)
Make the connections settings in the originator only. The connections settings are not necessary in the
target device.
Precautions for Correct UsePrecautions for Correct Use
Make the connections settings after you create tag sets for all of the devices involved in tag data
links.
 Registering Devices in the Register Device List
1 Double-click the icon of the device for which to make originator settings in the Network Configu-
ration Pane of the Network Configurator. The Edit Device Parameters Dialog Box is displayed.
Right-click the icon to display the pop-up menu, and select Parameter – Edit.
2 Click the Connections Tab in the Edit Device Parameters Dialog Box. All of the devices regis-
tered in the network (except the local node) are displayed.
7-2-5 Connection Settings
Connection Settings (Connections Tab Page)

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English