Appendices
A-48
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
To display the properties of the EDS file, use the following procedure.
1
Select the desired hardware (device) from the Hardware List.
2
Select EDS File - Property.
The following dialog box is displayed.
The time and date when the EDS file was created is displayed, along with the device informa-
tion.
To manually add an EDS file or if a device is not displayed correctly in the hardware list, use the follow-
ing procedure to recreate the EDS index file. (This applies to Network Configurator version 3.30 or
higher.)
1
Select EDS File - Create EDS Index File.
2
Restart the Network Configurator.
A-3-6 Displaying EDS File Properties
EDS File - Property
A-3-7 Creating EDS Index Files
EDS File - Create EDS Index File
To Next Page
Loading...
Need help?
General
