A-39
Appendices
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
A-2 Use the Sysmac Studio to Set the Tag Data Links (EtherNet/IP Connections)
A
A-2-6 Troubleshooting
Problems
• The connection setting data cannot be transferred
Data Transmission Screen Problem
Synchronization Window The Sysmac Studio displays the following error message and the data will
not be transferred.
Transfer to Controller Dialog
Box
The Sysmac Studio displays the following error dialog box and the data will
not be transferred.
EtherNet/IP Connection Set-
ting Tab Page
The Transfer to Controller and Transfer from Controller Buttons are
grayed out and the data cannot be transferred/compared.
To Next Page
Loading...
