6-124
6
Digital Output Functions (H2-01 to H2-03)
During Speed Limit (“31”)
If a digital output is set for this function the output is activated, if the output speed is at the speed limit.
ASR active for Torque Control (“32”)
Using this output function a digital output can be used to monitor the status of the speed limit function. The
output is switched:
• ON, if the torque reference is taken from the ASR output and the motor is operating at the speed limit
• OFF, if the torque reference is taken from the analog input
Option Card (AI-14B)
(0 to ±10 V)
Channel 3
b1-01 = 1
F2-01 = 0
d5-01 = 1
H3-05 =14
H3-08 = 0
H3-09 = 13
Channel 1 of the AI-14B card replaces
analog input A1
Torque Compensation Input
Method
Location of Refer-
ence
Parameter
Settings
Remarks
To Next Page
Loading...
Need help?
General