10-15
10
* 1. The factory setting depends on the inverter model and the control method.
* 2. The values in parentheses indicate initial values when initialized in 3-wire sequence.
S2-05 Ratio Change Speed Agree Width 0.5 Hz
T1-00 Motor 1/2 selection 1
T1-01 Autotuning mode selection 0
T1-02 Motor output power *1
T1-03 Motor rated voltage *1
T1-04 Motor rated current *1
T1-05 Motor base frequency 50.0 Hz
T1-06 Number of motor poles 4 poles
T1-07 Motor base speed 1450 r/min
T1-08 Number of PG pulses 1024
T1-09 Motor no-load current *1
No. Name
Factory
Setting
Setting
To Next Page
Loading...
