Note: Due to network security concerns, TX1 no longer supports SMB 1.0
as a mounting option for CIFS shares. Any bookmark previously stored
that utilized SMB 1.0 will indicate that it is now invalid. The only course of
action is to delete the existing bookmark and then remount and re-
bookmark the share with a different SMB version selected.
6. The CIFS share should now be listed in the Sources or Destinations drive list,
depending on where you chose to mount it. To save a share as a bookmark tap
the Save As Bookmark button under the CIFS drive tile, enable or disable the
desired Username and Password values to be saved, and then tap the Save as
Bookmark button.
Chapter 4 Using TX1
104
OpenText™ Tableau™ Forensic TX1 Imager
ISTX240300-UGD-EN-1
To Next Page
Loading...
