There are several actions that can be taken on jobs from the Jobs tab, depending on
both the state and type of the job. Queued Jobs and jobs shown in the Recent area
can be deleted by tapping the Delete button on the right side of the job row. Jobs
in the Active Jobs area can be canceled by tapping the Cancel button . Imaging
jobs in the Active area that are capable of being paused and resumed (of type e01,
ex01, dd, and dmg) can be paused by tapping on the Pause button , at which
point the job will be moved to the Recent area with a status of Paused. Tapping the
Play button or tapping the Resume Job button in the header of the Job Status
screen will display a Resume Duplication screen. See “Pausing and resuming a
duplication job” on page 106 for more information about pause and resume.
2.2.4 Job status
After a job starts, its Job Status screen is automatically displayed. This status screen
shows the details of a given job, including a header with its status, overall data rate,
time remaining, and percent complete. The lower area of the Job Status screen
shows additional job details, including sub-step progress (for example, Duplication
separate from Verification in a duplication/verification job), a settings summary,
and a listing of the drives involved in the job. Tapping a drive tile opens a drive
details screen, which provides a quick view of all the information available for the
drive. An example of an active Job Status screen is shown below.
Chapter 2 Overview
18
OpenText™ Tableau™ Forensic TX1 Imager
ISTX240300-UGD-EN-1
To Next Page
Loading...
