3.2.4 User management
In some forensic work environments, it may be desirable to set up distinct users with
unique passwords to limit access to the available TX1 units. Also, with the addition
of remote access capability, the ability to set user credentials has become a security
requirement. TX1 ships with a default user named User1, which has administrator
rights but no password and no remote access. User1 also has Auto Login enabled
(which is only possible for users with no set password). These defaults make TX1
easy to use in environments that do not require user management or remote access.
If your work environment would benefit from setting up individual users with
credentials, or to simply add remote access capability to any user (even default
User1), tap the Users item from the side navigation menu. A list of users who are set
up are displayed on the left tab. An example of the initial user list screen (with only
default User1) is shown below. From this initial user list screen, a user with
administrator rights can delete or modify any existing user and create new users.
Note: Only users with administrator rights (including default User1) can
access this User Management area of TX1. If a user is logged in who does not
have administrator rights enabled, the Users button on the side navigation
menu will be grayed out and unusable.
3.2. Configuring TX1
ISTX240300-UGD-EN-1
User Guide
35
To Next Page
Loading...
