OPENTEXT Tableau Forensic TX1 - Thunderbolt 2 Adapter Cable

5.4.3 Thunderbolt 2 adapter cable
Adapting from a Thunderbolt 2 connector on a Mac to TX1 requires two separate
adapters/cables. A Thunderbolt 2 to FireWire 800 (9-pin) adapter is used along with
the same FireWire 800 (9-pin to 9-pin) cable shown above to connect between the
Thunderbolt 2 port on the Macintosh and the TX1 FireWire 800 port. A Thunderbolt
2 to FireWire 800 adapter is shown below.
5.4. Apple Target Disk Mode acquisition adapters
ISTX240300-UGD-EN-1
User Guide
201