3.5 Turning TX1 off
To turn off your TX1, simply push the power button in the top left corner of the unit.
The shutdown options will be different for an idle unit versus one that has active/
queued jobs. For an idle unit, confirm the request by tapping the Shutdown button,
or tap the Cancel button to keep the unit powered up.
For a unit with active/queued jobs, the choices are expanded to include an option to
wait for jobs to complete before the unit is turned off. This feature is convenient for
running a job overnight or over a weekend with the unit unattended, as it will help
reduce power consumption and unnecessary runtime on any attached drives. To
turn off TX1 when the current job(s) is (are) complete, simply push the power button
in the top left corner of the unit as you normally would, and then tap the Wait for
jobs button. After all active/queued jobs complete, the unit will power itself off. This
will work for any job type.
Note: If the power button shutdown method described above is used, there is
no need to eject any attached drives before shutting down TX1. Using this
proper shutdown method allows the software time to quiesce any active tasks
and eject drives prior to turning the unit off. Forcing TX1 to power off by
pulling the power cord or holding down the power button is not
recommended, as it may corrupt any existing partition/filesystem information.
3.5. Turning TX1 off
ISTX240300-UGD-EN-1
User Guide
73
To Next Page
Loading...
