Chapter 3
Configuring TX1
This chapter describes the steps to configure TX1 prior to using it on a regular basis.
3.1 Startup sequence
When turned on, TX1 displays an initialization screen during the boot sequence.
Once booted, TX1 displays the Home screen and then sequentially powers on
connected drives.
3.2 Configuring TX1
TX1 default settings are defined using sensible, best-practice values. There are many
options and settings you can configure and customize to your specific needs. Tap the
Side Navigation menu icon in the upper left corner to access the following options:
• Home: Return to the Home screen.
• Logs: Access the forensic Logs screen.
• System Settings: Access the System Settings screen.
• Network Settings: Access the Network Settings screen.
• Defaults: Access the Operations Defaults screen.
• Users: Access the administrator level User Management screen.
• Lock System: Lock the screen with a PIN to prevent access while unattended.
• About: Access the About screen to view additional information such as the
firmware build Id, serial number, network MAC address, copyright, and
licensing information.
• User: Access the User Management screen for the current user.
3.2.1 System settings
Tap System Settings to display the System Settings page.
ISTX240300-UGD-EN-1
User Guide
23
To Next Page
Loading...