4.11 Logs module
TX1 generates a detailed log for all forensic jobs and most media utility operations.
The detailed information captured in the logs will depend on the job type. A
summary of the information captured for an image-based duplication job is shown
below. See the sample logs at the end of this section for some specific job log
examples.
• Status ‒ Overall job status (Incomplete, Ok, Error/Failed, Cancelled) as well as
date/time stamps, username, job notes, and TX1 unit and firmware version
information.
• Source ‒ Source drive details, including overall drive information (interface type,
make/model number, firmware version, serial number, HPA/DCO/AMA related
information, RAID and encryption information, size/layout information, and the
partition table type), partition details, and, if present and supported by TX1,
filesystem specific information.
• Acquisition Results ‒ Details about the acquisition aspects of the job, including
block start and count numbers, acquisition hash values, and read error
information.
4.11. Logs module
ISTX240300-UGD-EN-1
User Guide
181
To Next Page
Loading...
