Individual files and/or folders can be manually selected simply by clicking on
the orange box to the left of the desired item. In the example above, we have
chosen to include /Users/BadGuy/Documents, /Users/BadGuy/Downloads, and
Users/Default.
Note the following items related to manual file/folder selection in this browse
modal:
• Selections are limited to 50 files/folders. Children files/folders of a selected
parent folder do not count towards this limit.
• If a parent folder is selected, individual children cannot be deselected. First
deselect the parent, then go in and select the desired children.
Notice that the total count of selected items is shown in the row between the
filesystem information at the top and the directory tree at the bottom. This count
reflects the manually selected items and does not include children of a selected
parent folder.
For more details about the criteria by which you can include or exclude files for
logical imaging, see “Include/exclude criteria” on page 129 and its subsections.
7. To select the destination drive(s) tap the 4 or Destination(s) heading. All
available destination drives will be shown in a modal window, with a tile shown
below each drive to show its recognized filesystem(s). Tap the desired
Chapter 4 Using TX1
124
OpenText™ Tableau™ Forensic TX1 Imager
ISTX240300-UGD-EN-1
To Next Page
Loading...
