Referring to the drive details screenshot above, the fact that the HPA has been
removed is reflected in the following areas on this screen:
The Size field in the header reflects the full capacity of the drive (with HPA
removed), along with a warning to draw attention to the HPA removal event.
The drive utilization data on the right side accurately reflects the existence of 0 bytes
of HPA (since the HPA was removed).
The protocol information area shows the fact that no sectors are currently hidden, as
well as how many were exposed when the HPA was removed.
TX1 never makes automatic changes to any drive capacity limiting configurations on
destination drives. TX1 was designed to give the forensic practitioner complete
control over the destination drive. If you choose to restrict the destination drive
capacity using HPA, DCO, or AMA TX1 will not override that decision.
3.3. Media utilities (traditional media)
ISTX240300-UGD-EN-1
User Guide
61
To Next Page
Loading...
