Enable and Verify a DIMM
Tighten the screw six turns to secure.
4.
Return the server to operation.
See “Returning the Server to Operation” on page 171.
Related Information
■
“Memory Riser and DIMM Configuration” on page 89
■
“Remove a DIMM” on page 100
■
“Enable and Verify a DIMM” on page 106
Enable and Verify a DIMM
1.
At the Oracle ILOM prompt type show faulty.
■ If the output indicates a POST-detected fault, go to step 2.
106 SPARC T8-2 Server Service Manual • June 2019
To Next Page
Loading...
