Removing Power From the Server
Removing Power From the Server
Step Description Links
1. Prepare the server for powering off. “Prepare to Power Off the Server” on page 51
2. Power off the server by one of three methods. “Power Off the Server (Oracle ILOM)” on page 52
“Power Off the Server (Server Power Button -
Graceful)” on page 53
“Power Off the Server (Emergency
Shutdown)” on page 53
3. Disconnect the power cords from the server. “Disconnect Power Cords” on page 54
Related Information
■
“Front Panel Components (Service)” on page 13
■
Servers Administration
Prepare to Power Off the Server
Perform this procedure before powering off the server.
1.
Log in as superuser or equivalent.
Depending on the type of problem, you might want to view server status or log files. You also
might want to run diagnostics before you shut down the server.
2.
Notify affected users that the server will be shut down.
Refer to the Oracle Solaris system administration documentation for additional information.
3.
Save any open files and quit all running programs.
Refer to your application documentation for specific information on these processes.
4.
Shut down all logical domains.
Refer to Oracle Solaris system administration and Oracle VM Server for SPARC documentation
for additional information.
5.
Shut down the Oracle Solaris OS.
Refer to the Oracle Solaris system administration documentation for additional information.
Preparing for Service 51
To Next Page
Need help?
General