Oracle SPARC T8-2 User Manual

Locate the Server
■ At the Oracle ILOM prompt type:
-> show /System

/System
Targets:
. . .
In the output look for a line under Properties that identifies the product serial number. For
example:
serial_number = BKL1026F8F
Related Information
■
“Front Panel Components (Service)” on page 13
Locate the Server
You can use the Locate indicators to identify one particular server from many other servers.
1.
At the Oracle ILOM prompt, type,
-> set /System locator_indicator=on
The white System Locate indicators (one on the front panel and one on the rear panel) blink.
2.
After locating the server with the blinking System Locate indicator, turn it off by
pressing the Locate button with a stylus.
Alternatively, you can type an Oracle ILOM command to turn off the System Locate indicator.
-> set /System locator_indicator=off
Related Information
■
“Front Panel Components (Service)” on page 13
50 SPARC T8-2 Server Service Manual • June 2019

Oracle SPARC T8-2 Specifications

General

Brand	Oracle
Model	SPARC T8-2
Category	Server
Language	English