Oracle SPARC T8-2 - Remove a DIMM

Remove a DIMM
4.
Open the latch and lift the memory riser straight up to remove the memory riser
from the memory module socket.
Related Information
■
“Install a Memory Riser” on page 104
■
“Remove a DIMM” on page 100
Remove a DIMM
Caution - This procedure requires handling components that are sensitive to ESD. Follow
antistatic practices to avoid damage or component failure.
DIMMs or DIMM fillers must be removed:
100 SPARC T8-2 Server Service Manual • June 2019