Oracle SPARC T8-2 User Manual

Log In to Oracle ILOM (Service)
Step Description Links
2.
Run the show disabled command to
display information about components
that have been disabled either
intentionally or because of a failure.
Plan to service any components that are
degraded or might need service soon to
minimize system downtime.
“Identify Disabled Components” on page 31
3. Identify the names of components that
require service as reported by diagnostic
software.
“Component Names Displayed by Diagnostic
Software” on page 32
Related Information
■
“Interpreting LEDs” on page 33
■
“Performing Advanced Troubleshooting” on page 37
■
“Clear a Fault Manually” on page 43
Log In to Oracle ILOM (Service)
At the terminal prompt, type:
ssh root@SP-IP-address
Password: password
Oracle (R) Integrated Lights Out Manager
Version 4.0.x
Copyright (c) 2017, Oracle and/or its affiliates, Inc. All rights reserved.
->
Related Information
■
“Identify Faulted Components” on page 29
■
“Identify Disabled Components” on page 31
■
“Component Names Displayed by Diagnostic Software” on page 32
28 SPARC T8-2 Server Service Manual • June 2019

Oracle SPARC T8-2 Specifications

General

Brand	Oracle
Model	SPARC T8-2
Category	Server
Language	English