Oracle SPARC T8-2 - Page 30

Identify Faulted Components
Part_Number : 12345678+13+2
Serial_Number : 1248DC140

Description : A FRU has been inserted into a location where it is not
supported.

Response : The service required LED on the chassis may be illuminated.

Impact : The FRU may not be usable in its current location.

Action : Please refer to the associated reference document at
http://support.oracle.com/msg/SPT-8000-PX for the latest
service procedures and policies regarding this diagnosis.
faultmgmtsp>


In this example, a fault is displayed that includes these details:
■
Date and time of the fault (2015-01-16/17:55:26).
■
UUID (f4ee56c-9fdd-ca19-efb5-ae39675dfee3), which is unique to each fault.
■
Message ID (SPT-8000-PX), which can be used to obtain additional fault information from
Knowledge Base articles.
2.
Use the message ID to obtain more information about this type of fault.
a.
Obtain the message ID from console output (SPT-8000-PX in the example
above).
b.
Go to https://support.oracle.com, and search on the message ID in the
Knowledge tab, or type the URL from the Action field into a browser.
3.
Follow the suggested actions to repair the fault.
4.
If necessary, clear the fault manually.
See “Clear a Fault Manually” on page 43.
Related Information
■
“Log In to Oracle ILOM (Service)” on page 28
■
“Identify Disabled Components” on page 31
■
“Component Names Displayed by Diagnostic Software” on page 32
30 SPARC T8-2 Server Service Manual • June 2019